For Clients
How BIM helps a local house owner, not just big builders
You do not need a 40-storey tower to benefit from a model. A single 2BHK on a 30x40 site gains the most, because there is no room for waste.
5 min read
The problem with building from 2D drawings only
A plan, an elevation and a couple of sections leave a lot unsaid. The mason interprets one thing, the electrician another, and you only discover the difference when a wall is already up. On a small plot every such correction eats into your budget and your room sizes.
What changes when your house exists as a model first
- You see the actual room volumes, ceiling heights and window views before concrete is poured.
- Beam depths, sunshades, staircase headroom and loft heights are checked, not assumed.
- Plumbing and electrical routes are placed inside the model, so chasing and re-cutting reduce.
- Quantities of steel, concrete and blocks come from the model, so ordering is closer to reality.
A practical example
A staircase that looks fine in plan can leave only 1.85 m headroom under the mid-landing beam once the beam depth is drawn. In a model this shows up in the first week. On site, it shows up after the slab is cast, and the fix is either a lowered landing or a lifetime of ducking.
What you should ask for
- A 3D model of your house, not only printed drawings
- A walkthrough before finalising the layout
- Room-wise quantities so you can compare contractor quotes
- A coordinated drawing set the site team can actually build from
Have a project question?
Send your drawings or plot details and we will tell you plainly what BIM would change for your project.